PRODUCTS CENTER
-
Product name锛欽c-Drh-80/160/250 Low Temperature Biochemical Incubator -
Order number锛 -
Model锛欽C-DRH-80/160/250 -
Stock status锛欴elivery according to contract -
Logistics锛4銆乥y sea, by air, by express, etc.
- Product Introduction
-
1. Product introduction
The low temperature biochemical incubator is suitable for environmental protection, agriculture, livestock, aquatic products and other research, college experiments and production departments. It is a special low-temperature equipment for environmental testing.
2. Product parameters
model
JC-DRH-80
JC-DRH-150
JC-DRH-250
volume
80L
150L
250L
Cooling System
Hermetic compressor
cooling method
air cooling
ambient temperature
5锝35掳
temperature range
-2 0 ~ 50 鈩
temperature resolution
0.1 鈩
temperature uniformity
卤2 鈩
temperature fluctuation
卤1 鈩
Heating rate
2 ~ 3 鈩 /min can be increased to above 10 鈩 as needed
Cooling rate
0.7锝1鈩/min can be increased to above 10鈩 as needed
temperature range
30%锝98%RH can be customized according to customer requirements
Humidity error
鈮 +2 %/-3%RH
noise
鈮65dB (national standard is 鈮75dB )
power supply
~ 220V 50Hz
Liner size
400脳400脳500
500脳400脳750
550脳500脳900
Dimensions
500脳620脳1140
600脳610脳1500
650脳710脳1650
load carrier
3
3
3
Timing range
1-9999min
Remark
Non-standard sizes can be customized according to customer technical requirements ! The above data are all no-load data!
3.product features
1. intelligent LCD display control, microcomputer control of high and low temperature.
2. Mirror stainless steel liner is adopted, with semi-circular arc transition at four corners, and the shelf bracket can be freely installed and removed, which is convenient for cleaning inside the box.
3. The microcomputer temperature controller is adopted to quickly reach the set value and operate more stably.
4. International brand compressors and circulating fans, environmentally friendly refrigerants (R134a) have high efficiency, low energy consumption, and promote energy saving.
5. Equipped with an independent temperature limit alarm system, which will be automatically interrupted when the temperature exceeds the limit to ensure the safe operation of the experiment without accidents. (Optional)
6. It can be equipped with a printer or RS485 interface, which is used to connect a printer and a computer, and can record the changes of temperature parameters. (Optional)
-
